OTHER PRODUCTS

FLUSHING・ADDITIVE and OTHER CHEMICAL

Powerful cleaning ingredients NWP can remove accumulated sludge on the inside of the engine to keep the inside of the engine clean. Hold the appropriate oil film inside the engine and does not damage the metal surface such as a piston in the engine.
※Powerful cleaning ingredients NWP ( N-methy pyrrolidone )
Recommended use: 4-cycle gasoline-diesel engine internal cleaner
Capacity: 250ml
Ingredients: Lubricating base oil, detergent-dispersant
How to use
1. Stop engine and inject this product through the oil inlet before exchange the engine oil.
2.Make sure that it has closed the oil filler cap, then start the engine to clean the inside of the engine in an idling state of about 10 minutes.
3. Stop engine and drain the engine oil.
4.Adding new engine oil after replacing the oil filter.
MOLYGREEN SUPER FLUSH 250ml

Remove accumulated sludge on the inside of the engine to keep the inside of the engine clean.
Recommended use: 4-cycle gasoline-diesel engine internal cleaner
Capacity: 300ml
Ingredients: Lubricating base oil, detergent-dispersant
How to use
1. Stop engine and inject this product through the oil inlet before exchange the engine oil.
2.Make sure that it has closed the oil filler cap, then start the engine to clean the inside of the engine in an idling state of about 10 minutes.
3. Stop engine and drain the engine oil.
4.Adding new engine oil after replacing the oil filter.
MOLYGREEN ENGINE FLUSH 300ml

Even if the engine just start to move, friction surface can be protected by the adsorption effect of protection molecule of ester. Protect inside of engine with the double effect of protection molecule of ester and friction-reducing effect of fluorine resin coating of PTFE.
Recommended use: Engine oil additive for automotive gasoline engine
Capacity: 300ml
How to use: Pour 300ml into 3~5L engine oil
MOLYGREEN ULTRACOAT ADDITIVE FOR GASOLINE ENGINE OIL

Form a reaction film on the metal surface and reduce friction to improve the lubrication performance, and also reduce the engine noise, protect the inside of engine from abrasion by the effect of molybdenum.
Recommended use: Engine oil additive for automotive gasoline engine
Capacity: 220ml
How to use: Pour 300ml into 4L engine oil
MOLYGREEN ULTRACOAT ADDITIVE FOR GASOLINE ENGINE OIL

DOT-4 BRAKE FLUID (0.5L capacity)
High quality brake fluid type 4. Stable braking performance owing to the high boiling point. Wet boiling point over 155℃.
MOLYGREEN BF-4

DOT-3 BRAKE FLUID (0.5L capacity)
High quality brake fluid type 3 with high anti-rust property.Wet boiling point over 140℃.