top of page
ENGINE FLUSH 300ml
Engine internal cleaner
Remove accumulated sludge on the inside of the engine to keep the inside of the engine clean.
Recommended use: 4-cycle gasoline-diesel engine internal cleaner
Ingredients: Lubricating base oil, detergent-dispersant
How to use
1. Stop engine and inject this product through the oil inlet before exchange the engine oil.
2.Make sure that it has closed the oil filler cap, then start the engine to clean the inside of the engine in an idling state of about 10 minutes.
3. Stop engine and drain the engine oil.
4.Adding new engine oil after replacing the oil filter.
Density (15ﾟC) g/cm3
Flash Point (COC) ﾟC
Kinematic Viscosity 40ﾟC mm2/s
Kinematic Viscosity 120ﾟC mm2/s
HTHS (150ﾟC) cP
CCS mPa・s (mPa・s)
CCS mPa・s (ﾟC)
Pour Point ﾟC
TBN mgKOH/g HCL
TBN mgKOH/g HCL04
bottom of page