top of page

ENGINE FLUSH 300ml
Engine internal cleaner
Remove accumulated sludge on the inside of the engine to keep the inside of the engine clean.
Recommended use: 4-cycle gasoline-diesel engine internal cleaner
Capacity: 300ml
Ingredients: Lubricating base oil, detergent-dispersant
How to use
1. Stop engine and inject this product through the oil inlet before exchange the engine oil.
2.Make sure that it has closed the oil filler cap, then start the engine to clean the inside of the engine in an idling state of about 10 minutes.
3. Stop engine and drain the engine oil.
4.Adding new engine oil after replacing the oil filter.
Color ASTM
-
Density (15゚C) g/cm3
0.86~0.89
Flash Point (COC) ゚C
216
Kinematic Viscosity 40゚C mm2/s
35
Kinematic Viscosity 120゚C mm2/s
-
Viscosity Index
-
HTHS (150゚C) cP
-
CCS mPa・s (mPa・s)
-
CCS mPa・s (゚C)
-
Pour Point ゚C
-
TAN mgKOH/g
-
TBN mgKOH/g HCL
-
TBN mgKOH/g HCL04
-
bottom of page